The AERSON fan was designed for maximum cooling performance with a pleasant noise level at the same time .

In addition to the high cooling performance, the tower fan has 3 speed levels, an oscillation function, a timer function, an LED display and a remote control .

Properties:
- 3 speed levels
- room temperature display
- LED display
- timer function of 30 minutes - 7.5 hours, adjustable in 30-minute intervals
- power: 45 W
- oscillation function 90°
- touch operation with signal tone
- display switch-off in "sleep mode "
- Air flow rate: 20.88 m3/min
- Carrying handle
- Cable length 150cm
- Weight: 2.5 kg
- Overall height: 80 cm
- Long-life, high-performance

motor Specifications:
- Main power supply: 220-240 V~
- Frequency: 50 Hz
- Output: 45 W
- Speed levels: 3
- Maximum airflow: 20.88 m3/min
- Power consumption: 35.7 W
- Standby power consumption: 0.00 W
- Fan sound power level: 59.90 dB(A)
- Maximum air speed: 2.65 m/s

Remote control functions:
- Speed adjustment -
Timer setting
- Oscillation function on/off
- Mode adjustment: "Nature" , "Sleep", "Normal":

Control panel functions:

• "Nature", on the lowest level: Ventilation intensity alternates evenly between low and briefly switching off, the display does not switch off
• "Nature", at medium level: fan runs through the intensity levels medium, low, medium and "off", display does not switch off
• "Nature", at the highest level: The fan runs through the intensity levels High, Medium, High, Medium, High, Medium, High and "Off", the display does not switch off
• "Sleep", at the lowest level: fan switches on and off at short intervals, display switches off
• "Sleep", at medium level: fan runs through the intensity levels low, medium and "off", display switches off
• "Sleep", at the highest level: fan runs through the intensity levels medium, high and "off", display switches off
• "Normal", the fan runs at the desired intensity level with the desired functions (timer, oscillation), the display does not switch off, permanent reading of the room temperature, for example, is possible at any time

The fan is equipped with a timer that allows you to set its operating time from 30 minutes to 7.5 hours. As soon as the device is connected to the socket or switched on, the display shows the room temperature . The information can be falsified in direct sunlight. Pressing the 'OSC' button starts and stops the oscillation function . The icon will appear on the display. Once "Sleep Mode" or "Timer" is active, the main display will turn off after 30 seconds. The display can be switched on again by pressing any button.

ED2076