About this item

• Two heating strengths can be selected (1 = 1,200 watts 2 = 2,000 watts) + thermostat for regulating and setting the desired temperature.
• Heating jet can be adjusted vertically at 90° angle + pure fan operation also possible without a heating function.
• Also suitable for continuous operation or as a frost guard + overheating protection and protected against particles > 12.5 mm (IP20).
• Continuously variable temperature control (0 ~ 45 °C) + LED operating light + no adjustment in case of power failure + suitable for wall mounting.
• Effortless mobility thanks to its handy carrying handle, quiet operation, no oxygen consumption, very modern design, GS tested.
• This very modern electric heater with a normal mains plug (230 V) impresses with its easy handling. The device is very effective and made of durable metal and plastic. In addition, this electric heater is ideal as a frost monitor, as it completely switches off when the target temperature is reached and automatically switches on again if the room temperature has fallen below the target value. The device or the heating jet can be swiveled vertically at an angle of 90°
  Two heating strengths selectable (1 = 1,200 watt, 2 = 2,000 watt), thermostat for regulating and setting the desired temperature. The heating jet can be adjusted vertically at an angle of 90 degrees. Pure fan operation is also possible without a heating function. Also suitable for continuous operation or as a frost monitor. Overheating protection and protection against particles > 12.5 mm. (IP20) Continuous temperature control (0 ~ 45 °C) LED operating light + no adjustments in the event of power failure (device continues where it has been interrupted). Effortless mobility thanks to the handy carry handle. Suitable for wall mounting. The device is ready for immediate use (no installation or assembly required). Quiet operation + no oxygen consumption of use: Temperature regulation: Construction sites, workshops, agriculture, apartments, garages, warehouses, basements, sheds, gazebos, laundry rooms and for use in work and hobby etc. Also ideal as a frost guardDrying: Ideal for faster drying in new construction etc. (It can be quickly worked on or retracted)Humid rooms: Ideal for damp cellars, old masonry and drying all damp objectsDamage removal: After flooding or damage caused by extinguishing water, these devices are ideal for supporting the drying process.Technical data:Voltage: 220 V - 240 V / 50 HzMax. Power consumption: 2000 W (9.1 A)Heat settings: 3 (1 = 28 W, 2 = 1200 W, 3 = 2000 W)Thermostat: Continuous adjustment (0 ~ 45 °C)Accuracy: +/- 3 °CAir flow rate: Approx. 170 m3/hProtection class: IP20 (foreign body protection with diameter > 12.5 mm)Dimensions (H x W x D): 320 x 300 x 250 mmWeight: 3.1 kg.